Dense brush
Mixed overgrowth and heavy brush around open land, property edges and neglected areas.
Brush clearing
Forestry & Vegetation
Forest Mulcher
For brush, shrubs, saplings and dense woody vegetation
Built for woody
vegetation
The BETENSH Forest Mulcher is an excavator-mounted mulching head for clearing brush, shrubs, saplings and dense growth along field edges, roadsides, ditches and managed land.
A high-speed rotor with replaceable working tools breaks vegetation down as the machine positions the head through the work area.
Where it works
One product, several clearing jobs. The application stays centered on woody and heavier vegetation.
Shrubs & saplings
Young woody growth and repeated regrowth where a stronger rotor-and-tool system is required.
Woody growthDitch & roadside
Vegetation along drainage channels, road edges and other areas that benefit from boom reach.
Edge workField-edge clearing
Dense growth around agricultural boundaries, utility corridors and managed land.
Land managementMODELS & SPECIFICATIONS
Common operating values are shown once, and model rows only carry what changes.
Pressure15–30 MPa
Rotor speed2500–3000 r/min
| Model | Motor displacement | Excavator | Weight | Tool groups |
|---|---|---|---|---|
| BFM-6000.6 m working width | 12 cc/r | 3–5 ton | 240 kg | 14 |
| BFM-7000.7 m working width | 12 cc/r | 3–5 ton | 320 kg | 16 |
| BFM-8000.8 m working width | 12 cc/r | 3–5 ton | 340 kg | 18 |
| BFM-10001.0 m working width | 23 cc/r | 6–8 ton | 480 kg | 24 |
| BFM-12001.2 m working width | 28 cc/r | 8–12 ton | 530 kg | 28 |
| BFM-14001.4 m working width | 32 cc/r | 12–15 ton | 645 kg | 34 |
| BFM-16001.6 m working width | 80 cc/r | ≥20 ton | 720 kg | 38 |
Final model selection should be confirmed against machine model, auxiliary flow, pressure, mounting dimensions, working width and vegetation conditions rather than tonnage alone.
PRODUCT DESIGN
Rotor & replaceable working tools
The working rotor spans the front opening and carries individually replaceable tools for repeated contact with woody vegetation.
Worn tools can be serviced individually instead of replacing the complete rotor assembly.
Mounting, hose routing & service access
The upper mounting structure is matched to the carrier interface, while the hose layout stays clear of the working opening.
Bolted side and top covers keep key areas accessible for routine inspection and service.
Working tools
Replaceable pieces are treated as service items and can be planned with the expected workload.
Machined rotor-end components
Machined end components form part of the rotor assembly and support accurate fit-up during manufacture and service.
REAL FIELD WORK
Brush, ditch and field-edge clearing in real operating conditions.
Ditch and field-edge clearing
The boom positions the mulcher into dense growth along the edge while the working head stays visible to the operator.
Woody vegetation clearing
The mulcher works through heavier growth in a wooded operating area while the original portrait footage remains intact.
SUPPORT & MAINTENANCE
Plan wear parts around expected use
Replaceable working tools are service items. Spare quantities can be planned around expected workload, vegetation conditions and service interval.
Remote support that stays practical
BETENSH can support installation, inspection and troubleshooting with photos, video and screen-recorded guidance when useful.
Qualified component support within one year
For qualified covered component issues within one year, BETENSH can provide the replacement component without charging for the component itself where the issue qualifies for support.
Courier and international transport are normally borne by the Customer unless otherwise agreed.
FAQ
Brush, shrubs, saplings, dense woody growth, ditch-side vegetation, roadside clearing and field-edge maintenance.
Its primary use is woody and heavier vegetation. Final suitability should be confirmed against the actual vegetation and site conditions.
The rotor carries replaceable tools that repeatedly engage vegetation as the head moves through the work area.
Yes. The tools are replaceable service items, so worn pieces can be changed individually.
Confirm the machine model, auxiliary flow, pressure, mounting dimensions, target vegetation and preferred working width rather than using tonnage alone.
They are common values across the listed BFM models, while width, motor displacement, weight and tool-group count change by model.
Replaceable working tools are the primary service items shown on this page. Spare planning should reflect expected workload and vegetation conditions.
BETENSH provides online technical support and can assist with installation, inspection and troubleshooting using photos, video and step-by-step guidance where appropriate.
ASKABOUTTHISPRODUCT
Share the machine model, vegetation type and working conditions. We will help narrow the configuration.